72″ x 48″ THIN Single Slope Shower Pans

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.  Make sure you pick up our HYDRO-BLOK Joint Sealant for the gluing of all seams and joints. Add any of our custom accessories to bring that added personal touch to your shower.

HYDRO-BLOK THIN Single Slope Shower Pans offer a flush entry shower solution with:

• limited subfloor reconstruction work needed.
• no floor joist re-structure needed.
• savings in time, cost and re-construction effort needed.
• no special engineering and structure changes needed.

For tile size 2” x 2” or smaller, we recommend using a higher compression grout such as epoxy or urethane for additional strength.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;
– Single Slope Shower Pan
– 2″ Mesh Tape
– Straight and Corner Putty Knives
– Full Installation Instructions

Available THIN Single Slope Shower Pans Sizes:

• 36″ x 60″
• 60″ x 36″
• 48″ x 72″
• 72″ x 48″

48″ x 72″ THIN Single Slope Shower Pans

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.  Make sure you pick up our HYDRO-BLOK Joint Sealant for the gluing of all seams and joints. Add any of our custom accessories to bring that added personal touch to your shower.

HYDRO-BLOK THIN Single Slope Shower Pans offer a flush entry shower solution with:

• limited subfloor reconstruction work needed.
• no floor joist re-structure needed.
• savings in time, cost and re-construction effort needed.
• no special engineering and structure changes needed.

For tile size 2” x 2” or smaller, we recommend using a higher compression grout such as epoxy or urethane for additional strength.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;
– Single Slope Shower Pan
– 2″ Mesh Tape
– Straight and Corner Putty Knives
– Full Installation Instructions

Available THIN Single Slope Shower Pans Sizes:

• 36″ x 60″
• 60″ x 36″
• 48″ x 72″
• 72″ x 48″

60″ x 36″ THIN Single Slope Shower Pans

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.  Make sure you pick up our HYDRO-BLOK Joint Sealant for the gluing of all seams and joints. Add any of our custom accessories to bring that added personal touch to your shower.

HYDRO-BLOK THIN Single Slope Shower Pans offer a flush entry shower solution with:

• limited subfloor reconstruction work needed.
• no floor joist re-structure needed.
• savings in time, cost and re-construction effort needed.
• no special engineering and structure changes needed.

For tile size 2” x 2” or smaller, we recommend using a higher compression grout such as epoxy or urethane for additional strength.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;
– Single Slope Shower Pan
– 2″ Mesh Tape
– Straight and Corner Putty Knives
– Full Installation Instructions

Available THIN Single Slope Shower Pans Sizes:

• 36″ x 60″
• 60″ x 36″
• 48″ x 72″
• 72″ x 48″

36″ x 60″ THIN Single Slope Shower Pans

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.  Make sure you pick up our HYDRO-BLOK Joint Sealant for the gluing of all seams and joints. Add any of our custom accessories to bring that added personal touch to your shower.

HYDRO-BLOK THIN Single Slope Shower Pans offer a flush entry shower solution with:

• limited subfloor reconstruction work needed.
• no floor joist re-structure needed.
• savings in time, cost and re-construction effort needed.
• no special engineering and structure changes needed.

For tile size 2” x 2” or smaller, we recommend using a higher compression grout such as epoxy or urethane for additional strength.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;
– Single Slope Shower Pan
– 2″ Mesh Tape
– Straight and Corner Putty Knives
– Full Installation Instructions

Available THIN Single Slope Shower Pans Sizes:

• 36″ x 60″
• 60″ x 36″
• 48″ x 72″
• 72″ x 48″

72” x 72” Low Profile Centre Drain Shower Pans

HYDRO-BLOK’s NEW Low Profile Shower Pans are here! These unique pans allow centre-drain or tub replacement installation with flush or curb-less designs.

HYDRO-BLOK Low Profile Shower Pans feature an innovative new drain system featuring:

• Construction plug and grout over frame is adjustable for tile thickness & laterally for tile layout.
• Grout over frame gives a clean finish.
• Grate location can be adjusted 1⁄2 inch in any direction from center.

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;

• Low-Profile Shower Pan
• 2″ Mesh Tape
• Straight and Corner Putty Knives
• Water Test Plug
• Pan Template
• Full Installation Instructions

Available Low Profile Centre Drain Shower Pans Sizes:

• 36” x 36”
• 36” x 48”
• 36” x 60”
• 36” x 72”
• 36” x 72” Off-set Drain
• 48” x 48”
• 48” x 60”
• 48” x 72”
• 48” x 84”
• 60” x 60”
• 60” x 72”
• 60” x 84”
• 72” x 72”

60” x 84” Low Profile Centre Drain Shower Pans

HYDRO-BLOK’s NEW Low Profile Shower Pans are here! These unique pans allow centre-drain or tub replacement installation with flush or curb-less designs.

HYDRO-BLOK Low Profile Shower Pans feature an innovative new drain system featuring:

• Construction plug and grout over frame is adjustable for tile thickness & laterally for tile layout.
• Grout over frame gives a clean finish.
• Grate location can be adjusted 1⁄2 inch in any direction from center.

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;

• Low-Profile Shower Pan
• 2″ Mesh Tape
• Straight and Corner Putty Knives
• Water Test Plug
• Pan Template
• Full Installation Instructions

Available Low Profile Centre Drain Shower Pans Sizes:

• 36” x 36”
• 36” x 48”
• 36” x 60”
• 36” x 72”
• 36” x 72” Off-set Drain
• 48” x 48”
• 48” x 60”
• 48” x 72”
• 48” x 84”
• 60” x 60”
• 60” x 72”
• 60” x 84”
• 72” x 72”

60” x 72” Low Profile Centre Drain Shower Pans

HYDRO-BLOK’s NEW Low Profile Shower Pans are here! These unique pans allow centre-drain or tub replacement installation with flush or curb-less designs.

HYDRO-BLOK Low Profile Shower Pans feature an innovative new drain system featuring:

• Construction plug and grout over frame is adjustable for tile thickness & laterally for tile layout.
• Grout over frame gives a clean finish.
• Grate location can be adjusted 1⁄2 inch in any direction from center.

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;

• Low-Profile Shower Pan
• 2″ Mesh Tape
• Straight and Corner Putty Knives
• Water Test Plug
• Pan Template
• Full Installation Instructions

Available Low Profile Centre Drain Shower Pans Sizes:

• 36” x 36”
• 36” x 48”
• 36” x 60”
• 36” x 72”
• 36” x 72” Off-set Drain
• 48” x 48”
• 48” x 60”
• 48” x 72”
• 48” x 84”
• 60” x 60”
• 60” x 72”
• 60” x 84”
• 72” x 72”

60” x 60” Low Profile Centre Drain Shower Pans

HYDRO-BLOK’s NEW Low Profile Shower Pans are here! These unique pans allow centre-drain or tub replacement installation with flush or curb-less designs.

HYDRO-BLOK Low Profile Shower Pans feature an innovative new drain system featuring:

• Construction plug and grout over frame is adjustable for tile thickness & laterally for tile layout.
• Grout over frame gives a clean finish.
• Grate location can be adjusted 1⁄2 inch in any direction from center.

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;

• Low-Profile Shower Pan
• 2″ Mesh Tape
• Straight and Corner Putty Knives
• Water Test Plug
• Pan Template
• Full Installation Instructions

Available Low Profile Centre Drain Shower Pans Sizes:

• 36” x 36”
• 36” x 48”
• 36” x 60”
• 36” x 72”
• 36” x 72” Off-set Drain
• 48” x 48”
• 48” x 60”
• 48” x 72”
• 48” x 84”
• 60” x 60”
• 60” x 72”
• 60” x 84”
• 72” x 72”

48” x 84” Low Profile Centre Drain Shower Pans

HYDRO-BLOK’s NEW Low Profile Shower Pans are here! These unique pans allow centre-drain or tub replacement installation with flush or curb-less designs.

HYDRO-BLOK Low Profile Shower Pans feature an innovative new drain system featuring:

• Construction plug and grout over frame is adjustable for tile thickness & laterally for tile layout.
• Grout over frame gives a clean finish.
• Grate location can be adjusted 1⁄2 inch in any direction from center.

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;

• Low-Profile Shower Pan
• 2″ Mesh Tape
• Straight and Corner Putty Knives
• Water Test Plug
• Pan Template
• Full Installation Instructions

Available Low Profile Centre Drain Shower Pans Sizes:

• 36” x 36”
• 36” x 48”
• 36” x 60”
• 36” x 72”
• 36” x 72” Off-set Drain
• 48” x 48”
• 48” x 60”
• 48” x 72”
• 48” x 84”
• 60” x 60”
• 60” x 72”
• 60” x 84”
• 72” x 72”

48” x 72” Low Profile Centre Drain Shower Pans

HYDRO-BLOK’s NEW Low Profile Shower Pans are here! These unique pans allow centre-drain or tub replacement installation with flush or curb-less designs.

HYDRO-BLOK Low Profile Shower Pans feature an innovative new drain system featuring:

• Construction plug and grout over frame is adjustable for tile thickness & laterally for tile layout.
• Grout over frame gives a clean finish.
• Grate location can be adjusted 1⁄2 inch in any direction from center.

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;

• Low-Profile Shower Pan
• 2″ Mesh Tape
• Straight and Corner Putty Knives
• Water Test Plug
• Pan Template
• Full Installation Instructions

Available Low Profile Centre Drain Shower Pans Sizes:

• 36” x 36”
• 36” x 48”
• 36” x 60”
• 36” x 72”
• 36” x 72” Off-set Drain
• 48” x 48”
• 48” x 60”
• 48” x 72”
• 48” x 84”
• 60” x 60”
• 60” x 72”
• 60” x 84”
• 72” x 72”