High-Quality Replacement Drain Cover for HYDRO-BLOK Low Profile Center Drain Shower Pans. Available in Matte Black, Polished Chrome,  Oil Rubbed Bronze (Brushed Nickel cover is included with each Shower Pan) and Satin Brass. Also available for our Classic Center Drain Shower Pans.

NEW!

HYDRO-BLOK Seals for Pipes & Mixer Valves HYDRO-BLOK Shower Seals allow you to fully waterproof your HYDRO-BLOK shower system at shower heads, mixer valves and tub spouts etc without using sealant. Constructed from a high-quality waterproofing membrane and over-molded, stretchable rubber gaskets. Simple installation with a thin layer of thinset prior to tiling (see packaging for complete instructions).

• Fully Waterproofs your HYDRO-BLOK Shower without the need for sealant
• Simple & Quick Installation
• Stretchable Rubber Gaskets seal tightly
• Install over existing pipes or valves without the need for plumbing changes
• High quality waterproof membrane provides a fully waterproof barrier in conjunction with your HYDRO-BLOK Shower System

72″ x 48″ THIN Single Slope Shower Pans

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.  Make sure you pick up our HYDRO-BLOK Joint Sealant for the gluing of all seams and joints. Add any of our custom accessories to bring that added personal touch to your shower.

HYDRO-BLOK THIN Single Slope Shower Pans offer a flush entry shower solution with:

• limited subfloor reconstruction work needed.
• no floor joist re-structure needed.
• savings in time, cost and re-construction effort needed.
• no special engineering and structure changes needed.

For tile size 2” x 2” or smaller, we recommend using a higher compression grout such as epoxy or urethane for additional strength.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;
– Single Slope Shower Pan
– 2″ Mesh Tape
– Straight and Corner Putty Knives
– Full Installation Instructions

Available THIN Single Slope Shower Pans Sizes:

• 36″ x 60″
• 60″ x 36″
• 48″ x 72″
• 72″ x 48″

48″ x 72″ THIN Single Slope Shower Pans

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.  Make sure you pick up our HYDRO-BLOK Joint Sealant for the gluing of all seams and joints. Add any of our custom accessories to bring that added personal touch to your shower.

HYDRO-BLOK THIN Single Slope Shower Pans offer a flush entry shower solution with:

• limited subfloor reconstruction work needed.
• no floor joist re-structure needed.
• savings in time, cost and re-construction effort needed.
• no special engineering and structure changes needed.

For tile size 2” x 2” or smaller, we recommend using a higher compression grout such as epoxy or urethane for additional strength.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;
– Single Slope Shower Pan
– 2″ Mesh Tape
– Straight and Corner Putty Knives
– Full Installation Instructions

Available THIN Single Slope Shower Pans Sizes:

• 36″ x 60″
• 60″ x 36″
• 48″ x 72″
• 72″ x 48″

60″ x 36″ THIN Single Slope Shower Pans

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.  Make sure you pick up our HYDRO-BLOK Joint Sealant for the gluing of all seams and joints. Add any of our custom accessories to bring that added personal touch to your shower.

HYDRO-BLOK THIN Single Slope Shower Pans offer a flush entry shower solution with:

• limited subfloor reconstruction work needed.
• no floor joist re-structure needed.
• savings in time, cost and re-construction effort needed.
• no special engineering and structure changes needed.

For tile size 2” x 2” or smaller, we recommend using a higher compression grout such as epoxy or urethane for additional strength.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;
– Single Slope Shower Pan
– 2″ Mesh Tape
– Straight and Corner Putty Knives
– Full Installation Instructions

Available THIN Single Slope Shower Pans Sizes:

• 36″ x 60″
• 60″ x 36″
• 48″ x 72″
• 72″ x 48″

36″ x 60″ THIN Single Slope Shower Pans

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.  Make sure you pick up our HYDRO-BLOK Joint Sealant for the gluing of all seams and joints. Add any of our custom accessories to bring that added personal touch to your shower.

HYDRO-BLOK THIN Single Slope Shower Pans offer a flush entry shower solution with:

• limited subfloor reconstruction work needed.
• no floor joist re-structure needed.
• savings in time, cost and re-construction effort needed.
• no special engineering and structure changes needed.

For tile size 2” x 2” or smaller, we recommend using a higher compression grout such as epoxy or urethane for additional strength.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;
– Single Slope Shower Pan
– 2″ Mesh Tape
– Straight and Corner Putty Knives
– Full Installation Instructions

Available THIN Single Slope Shower Pans Sizes:

• 36″ x 60″
• 60″ x 36″
• 48″ x 72″
• 72″ x 48″

72” x 72” Low Profile Centre Drain Shower Pans

HYDRO-BLOK’s NEW Low Profile Shower Pans are here! These unique pans allow centre-drain or tub replacement installation with flush or curb-less designs.

HYDRO-BLOK Low Profile Shower Pans feature an innovative new drain system featuring:

• Construction plug and grout over frame is adjustable for tile thickness & laterally for tile layout.
• Grout over frame gives a clean finish.
• Grate location can be adjusted 1⁄2 inch in any direction from center.

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;

• Low-Profile Shower Pan
• 2″ Mesh Tape
• Straight and Corner Putty Knives
• Water Test Plug
• Pan Template
• Full Installation Instructions

Available Low Profile Centre Drain Shower Pans Sizes:

• 36” x 36”
• 36” x 48”
• 36” x 60”
• 36” x 72”
• 36” x 72” Off-set Drain
• 48” x 48”
• 48” x 60”
• 48” x 72”
• 48” x 84”
• 60” x 60”
• 60” x 72”
• 60” x 84”
• 72” x 72”

60” x 84” Low Profile Centre Drain Shower Pans

HYDRO-BLOK’s NEW Low Profile Shower Pans are here! These unique pans allow centre-drain or tub replacement installation with flush or curb-less designs.

HYDRO-BLOK Low Profile Shower Pans feature an innovative new drain system featuring:

• Construction plug and grout over frame is adjustable for tile thickness & laterally for tile layout.
• Grout over frame gives a clean finish.
• Grate location can be adjusted 1⁄2 inch in any direction from center.

All HYDRO-BLOK shower pans feature high quality construction with a 100% waterproof XPS foam core, covered by fibreglass mesh for added strength, and then coated in a modified cement surface for setting your choice of tile, stone, glass or mosaics on.

All HYDRO-BLOK Shower Pans include all the hardware you need for installation;

• Low-Profile Shower Pan
• 2″ Mesh Tape
• Straight and Corner Putty Knives
• Water Test Plug
• Pan Template
• Full Installation Instructions

Available Low Profile Centre Drain Shower Pans Sizes:

• 36” x 36”
• 36” x 48”
• 36” x 60”
• 36” x 72”
• 36” x 72” Off-set Drain
• 48” x 48”
• 48” x 60”
• 48” x 72”
• 48” x 84”
• 60” x 60”
• 60” x 72”
• 60” x 84”
• 72” x 72”